Finally I found something that looked promising. By duckduckgoing I found this post and added. It is a nice Distro, imo the best so far, very customizable, stable and up-to-date, but like all Distros it has its culprits. After more search I found this post and issued getent ahosts wdmycloud on my console. After issueing the mount command again, nothing different happend. After some more research I finally found an entry in ArchWiki mentioning that you need to activate a service called Winbind by issueing systemctl start winbind.
To make this service persistent you should enable it with the same command and replace start with enable. This site uses Akismet to reduce spam. Specifies the absolute path to the kerberos keytab file when kerberos method is set to "dedicated keytab". See the section on name mangling. Also note the short preserve case parameter. This parameter is only applicable to printable services. The device mode can only correctly be generated by the printer driver itself which can only be executed on a Win32 platform.
Because smbd is unable to execute the driver code to generate the device mode, the default behavior is to set this field to NULL. Certain drivers will do things such as crashing the client's Explorer. However, other printer drivers can cause the client's spooler service spoolsv.
This parameter should be used with care and tested with the printer driver in question. This parameter specifies the name of a service which will be connected to if the service actually requested cannot be found. Note that the square brackets are NOT given in the parameter value see example below. There is no default value for this parameter. If this parameter is not given, attempting to connect to a nonexistent service results in an error.
Typically the default service would be a guest ok , read-only service. This allows for interesting things. Windows allows specifying how a file will be shared with other processes when it is opened. Sharing violations occur when a file is opened by a different process using options that violate the share settings specified by other processes. This parameter causes smbd to act as a Windows server does, and defer returning a "sharing violation" error message for up to one second, allowing the client to close the file causing the violation in the meantime.
There should be no reason to turn off this parameter, as it is designed to enable Samba to more correctly emulate Windows. For a Samba host this means that the printer must be physically deleted from the underlying printing system. The deleteprinter command defines a script to be run which will perform the necessary operations for removing the printer from the print system and from smb. The deleteprinter command is automatically called with only one parameter: printer name.
Once the deleteprinter command has been executed, smbd will reparse the smb. This parameter allows readonly files to be deleted. This option may be useful for running applications such as rcs, where UNIX file ownership prevents changing file permissions, and DOS semantics prevent deletion of a read only file. The delete share command is used to define an external program or script which will remove an existing service definition from smb.
In order to successfully execute the delete share command , smbd requires that the administrator connects using a root account i. Scripts defined in the delete share command parameter are executed as root. When executed, smbd will automatically invoke the delete share command with two parameters.
This parameter is only used to remove file shares. To delete printer shares, see the deleteprinter command. Full path to the script that will be called when a user is removed from a group using the Windows NT domain administration tools.
This is the full pathname to a script that will be run by smbd 8 when managing users with remote RPC NT tools. This script is called when a remote client removes a user from the server, normally using 'User Manager for Domains' or rpcclient.
This option is used when Samba is attempting to delete a directory that contains one or more vetoed directories see the veto files option. If this option is set to no the default then if a vetoed directory contains any non-vetoed files or directories then the directory delete will fail. This is usually what you want. If this option is set to yes , then Samba will attempt to recursively delete any files and directories within the vetoed directory.
The dfree cache time should only be used on systems where a problem occurs with the internal disk space calculations. This has been known to happen with Ultrix, but may occur with other operating systems. The symptom that was seen was an error of "Abort Retry Ignore" at the end of each directory listing. This is a new parameter introduced in Samba version 3. It specifies in seconds the time that smbd will cache the output of a disk free query. If set to zero the default no caching is done.
This allows a heavily loaded server to prevent rapid spawning of dfree command scripts increasing the load. The dfree command setting should only be used on systems where a problem occurs with the internal disk space calculations.
This setting allows the replacement of the internal routines to calculate the total disk space and amount available with an external routine. The example below gives a possible script that might fulfill this function. In Samba version 3. The external program will be passed a single parameter indicating a directory in the filesystem being queried. This will typically consist of the string. The first should be the total disk space in blocks, and the second should be the number of available blocks.
An optional third return value can give the block size in bytes. The default blocksize is bytes. Note: Your script should NOT be setuid or setgid and should be owned by and writeable only by root! Note that you may have to replace the command names with full path names on some systems. Also note the arguments passed into the script should be quoted inside the script in case they contain special characters such as spaces or newlines. By default internal routines for determining the disk capacity and remaining space will be used.
Any bit not set here will be removed from the modes set on a directory when it is created. The default value of this parameter removes the 'group' and 'other' write bits from the UNIX mode, allowing only the user who owns the directory to modify it.
Following this Samba will bit-wise 'OR' the UNIX mode created from this parameter with the value of the force directory mode parameter. This parameter is set to by default i.
This parameter specifies the size of the directory name cache for SMB1 connections. It is not used for SMB2. Enabling this parameter will disable netbios support in Samba.
Netbios is the only available form of browsing in all windows versions except for and XP. Clients that only support netbios won't be able to see your samba server when netbios support is disabled. However, this will also disable the ability to upload printer drivers to a Samba server via the Windows NT Add Printer Wizard or by using the NT printer properties dialog window.
Be very careful about enabling this parameter. This would typically be used in conjunction with a hierarchical storage system that automatically migrates files to tape. Note that Samba infers the status of a file by examining the events that a DMAPI application has registered interest in.
This heuristic is satisfactory for a number of hierarchical storage systems, but there may be system for which it will fail. In this case, Samba may erroneously report files to be offline. This option sets the command that is called when there are DNS updates. This option should not be enabled for installations created with versions of samba before 4. Doing this will result in the loss of static DNS entries.
This is due to a bug in previous versions of samba BUG which marked dynamic DNS records as static and static records as dynamic. The IP list is comma and space separated and specified in the same syntax as used in hosts allow , specifically including IP address, IP prefixes and IP address masks. The default behaviour is to deny any request. A request will be authorized only if the emitting client is identified in this list, and not in dns zone transfer clients deny.
If a client identified in this list sends a zone transfer request, it will always be denied, even if they are in dns zone transfer clients allow. This allows the definition of specific denied clients within an authorized subnet. If set to yes , the Samba server will provide the netlogon service for Windows 9X network logons for the workgroup it is in. This will also cause the Samba server to act as a domain controller for NT4 style domain services.
Tell smbd 8 to enable WAN-wide browse list collation. Setting this option causes nmbd to claim a special domain specific NetBIOS name that identifies it as a domain master browser for its given workgroup. Local master browsers in the same workgroup on broadcast-isolated subnets will give this nmbd their local browse lists, and then ask smbd 8 for a complete copy of the browse list for the whole wide area network.
Browser clients will then contact their local master browser, and will receive the domain-wide browse list, instead of just the list for their broadcast-isolated subnet.
This means that if this parameter is set and nmbd claims the special name for a workgroup before a Windows NT PDC is able to do so then cross subnet browsing will behave strangely and may fail. If domain logons is not enabled the default setting , then neither will domain master be enabled by default. In general, this parameter should be set to 'No' only on a BDC.
There are certain directories on some systems e. This parameter allows you to specify a comma-delimited list of directories that the server should always show as empty. Note that Samba can be very fussy about the exact format of the "dont descend" entries.
For example you may need. Experimentation is the best policy This option specifies which charset Samba should talk to DOS clients. The default depends on which charsets you have installed. Run testparm 1 to check the default on your system. Enabling this parameter allows a user who has write access to the file by whatever means, including an ACL permission to modify the permissions including ACL on it.
Note that a user belonging to the group owning the file will not be allowed to change permissions if the group is only granted read access. Setting this parameter for a share causes Samba to round the reported time down to the nearest two second boundary when a query call that requires one second resolution is made to smbd 8. One of these calls uses a one-second granularity, the other uses a two second granularity.
Under DOS and Windows, if a user can write to a file they can change the timestamp on it. By default, Samba emulates the DOS semantics and allows one to change the timestamp on a file if the user smbd is acting on behalf has write permissions.
Due to changes in Microsoft Office and beyond, the default for this parameter has been changed from "no" to "yes" in Samba 3. Microsoft Excel will display dialog box warnings about the file being changed by another user if this parameter is not set to "yes" and files are being shared between users. When enabled, this option causes Samba acting as an Active Directory Domain Controller to stream Samba database events across the internal message bus. When enabled, this option causes Samba acting as an Active Directory Domain Controller to stream group membership change events across the internal message bus.
When enabled, this option causes Samba acting as an Active Directory Domain Controller to stream password change and reset events across the internal message bus. This boolean parameter controls whether Samba can grant SMB2 durable file handles on a share. Also note that, for the time being, durability is not granted for a handle that has the delete on close flag set.
This boolean parameter controls whether smbd 8 will allow clients to attempt to access extended attributes on a share.
In order to enable this parameter on a setup with default VFS modules:. The underlying filesystem exposed by the share must support extended attributes e. Note that the SMB protocol allows setting attributes whose value is 64K bytes long, and that on NTFS, the maximum storage space for extended attributes per file is 64K.
Giving clients access to this tight space via extended attribute support could consume all of it by unsuspecting client applications, which would prevent changing system metadata due to lack of space. The default has changed to yes in Samba release 4. Specifies the name of the Elasticsearch server to use for Spotlight queries when using the Elasticsearch backend. Specifies the name of the Elasticsearch index to use for Spotlight queries when using the Elasticsearch backend.
Path to a file specifying metadata attribute mappings in JSON format. A value of 0 means no limit. The has been the default behavior in smbd for many years. This parameter specifies whether core dumps should be written on internal exits.
This deprecated parameter controls whether or not smbd will honor privileges assigned to specific SIDs via either net rpc rights or one of the Windows user and group manager tools.
This parameter is enabled by default. It can be disabled to prevent members of the Domain Admins group from being able to assign privileges to users or groups which can then result in certain smbd operations running as root that would normally run under the context of the connected user.
An example of how privileges can be used is to assign the right to join clients to a Samba controlled domain without providing root access to the server via smbd. Inverted synonym for disable spoolss. This boolean controls whether encrypted passwords will be negotiated with the client.
Note that Windows NT 4. MS Windows clients that expect Microsoft encrypted passwords and that do not have plain text password support enabled will be able to connect only to a Samba server that has encrypted password support enabled and for which the user accounts have a valid encrypted password.
Refer to the smbpasswd command man page for information regarding the creation of encrypted passwords for user accounts. The use of plain text passwords is NOT advised as support for this feature is no longer maintained in Microsoft Windows products.
If you want to use plain text passwords you must set this parameter to no. This option enables a couple of enhancements to cross-subnet browse propagation that have been added in Samba but which are not standard in Microsoft implementations.
The first enhancement to browse propagation consists of a regular wildcard query to a Samba WINS server for all Domain Master Browsers, followed by a browse synchronization with each of the returned DMBs.
The second enhancement consists of a regular randomised browse synchronization with all currently known DMBs. You may wish to disable this option if you have a problem with empty workgroups not disappearing from browse lists.
Due to the restrictions of the browse protocols, these enhancements can cause a empty workgroup to stay around forever which can be annoying. In general you should leave this option enabled as it makes cross-subnet browse propagation much more reliable. The concept of a "port" is fairly foreign to UNIX hosts. LPD Port Monitor, etc By default, Samba has only one port defined-- "Samba Printer Port".
If you wish to have a list of ports displayed smbd does not use a port name for anything other than the default "Samba Printer Port" , you can define enumports command to point to a program which should generate a list of ports, one per line, to standard output.
This option defines a list of log names that Samba will report to the Microsoft EventViewer utility. Refer to the eventlogadm 8 utility for how to write eventlog entries. This is not the same as the ctime - status change time - that Unix keeps, so Samba by default reports the earliest of the various times Unix does keep.
Setting this parameter for a share causes Samba to always report midnight as the create time for directories. Thus the object directory will be created if it does not exist, but once it does exist it will always have an earlier timestamp than the object files it contains.
However, Unix time semantics mean that the create time reported by Samba will be updated whenever a file is created or deleted in the directory.
NMAKE finds all object files in the object directory. The timestamp of the last one built is then compared to the timestamp of the object directory. If the directory's timestamp if newer, then all object files will be rebuilt. Enabling this option ensures directories always predate their contents and an NMAKE build will proceed as expected.
Oplocks are the way that SMB clients get permission from a server to locally cache file operations. If a server grants an oplock opportunistic lock then the client is free to assume that it is the only one accessing the file and it will aggressively cache file data.
This can give enormous performance benefits. It is generally much better to use the real oplocks support rather than this parameter. If you enable this option on all read-only shares or shares that you know will only be accessed from one client at a time such as physically read-only media like CDROMs, you will see a big performance improvement on many operations.
If you enable this option on shares where multiple clients may be accessing the files read-write at the same time you can get data corruption. Use this option carefully! This parameter allows the Samba administrator to stop smbd 8 from following symbolic links in a particular share.
Setting this parameter to no prevents any file or directory that is a symbolic link from being followed the user will get an error. However it will slow filename lookups down slightly. This option is enabled i. This parameter specifies a set of UNIX mode bit permissions that will always be set on a file created by Samba.
This is done by bitwise 'OR'ing these bits onto the mode bits of a file that is being created. The default for this parameter is in octal The modes in this parameter are bitwise 'OR'ed onto the file mode after the mask set in the create mask parameter is applied.
This parameter specifies a set of UNIX mode bit permissions that will always be set on a directory created by Samba. This is done by bitwise 'OR'ing these bits onto the mode bits of a directory that is being created.
The default for this parameter is in octal which will not add any extra permission bits to a created directory. This operation is done after the mode mask in the parameter directory mask is applied.
This specifies a UNIX group name that will be assigned as the default primary group for all users connecting to this service. This is useful for sharing files by ensuring that all access to files on service will use the named group for their permissions checking. Thus, by assigning permissions for this group to the files and directories within this service the Samba administrator can restrict or allow sharing of these files. In Samba 2. This allows an administrator to decide that only users who are already in a particular group will create files with group ownership set to that group.
This gives a finer granularity of ownership assignment. All other users will retain their ordinary primary group. If the force user parameter is also set the group specified in force group will override the primary group set in force user. When printing from Windows NT or later , each printer in smb. The first is the sharename or shortname defined in smb. This is the only printername available for use by Windows 9x clients.
The second name associated with a printer can be seen when browsing to the "Printers" or "Printers and Faxes" folder on the Samba server. This is referred to simply as the printername not to be confused with the printer name option.
When assigning a new driver to a printer on a remote Windows compatible print server such as Samba, the Windows client will rename the printer to match the driver name just uploaded. This can result in confusion for users when multiple printers are bound to the same driver.
To prevent Samba from allowing the printer's printername to differ from the sharename defined in smb. Be aware that enabling this parameter may affect migrating printers from a Windows server to Samba since Windows has no way to force the sharename and printername to match.
It is recommended that this parameter's value not be changed once the printer is in use by clients as this could cause a user not be able to delete printer connections from their local Printers folder. This boolean option tells smbd whether to forcefully disable the use of Open File Description locks on Linux. If this parameter is set, a Windows NT ACL that contains an unknown SID security descriptor, or representation of a user or group id as the owner or group owner of the file will be silently mapped into the current UNIX uid or gid of the currently connected user.
This specifies a UNIX user name that will be assigned as the default user for all users connecting to this service. This is useful for sharing files. You should also use it carefully as using it incorrectly can cause security problems.
This user name only gets used once a connection is established. Thus clients still need to connect as a valid user and supply a valid password. Once connected, all file operations will be performed as the "forced user", no matter what username the client connected as.
This can be very useful. Prior to 2. FSRVP timeouts can be completely disabled via a value of 0. This parameter allows the administrator to configure the string that specifies the type of filesystem a share is using that is reported by smbd 8 when a client queries the filesystem type for a share.
The get quota command should only be used whenever there is no operating system API available from the OS that samba can use. The directory is actually mostly just ". This script should print one line as output with spaces between the columns. The printed columns should be:. This is a tuning option. When this is enabled a caching algorithm will be used to reduce the time taken for getwd calls. This can have a significant impact on performance, especially when the wide links parameter is set to no.
This option sets the command that is called to apply GPO policies. Kerberos Policies set kdc:service ticket lifetime, kdc:user ticket lifetime, and kdc:renewal lifetime in smb. This is a username which will be used for access to services which are specified as guest ok see below. Whatever privileges this user has will be available to any client connecting to the guest service.
This user must exist in the password file, but does not require a valid login. The user account "ftp" is often a good choice for this parameter. On some systems the default guest account "nobody" may not be able to print.
Use another account in this case. You should test this by trying to log in as your guest user perhaps by using the su - command and trying to print using the system print command such as lpr 1 or lp 1. If this parameter is yes for a service, then no password is required to connect to the service. Privileges will be those of the guest account. If this parameter is yes for a service, then only guest connections to the service are permitted.
This parameter will have no effect if guest ok is not set for the service. This is a boolean parameter that controls whether files starting with a dot appear as hidden files. This is a list of files or directories that are not visible but are accessible.
The DOS 'hidden' attribute is applied to any files or directories that match. Setting this parameter will affect the performance of Samba, as it will be forced to check all files and directories for a match as they are scanned. The example shown above is based on files that the Macintosh SMB client DAVE available from Thursby creates for internal use, and also still hides all files beginning with a dot.
Setting this parameter to something but 0 hides files that have been modified less than N seconds ago. A processing application should only see files that are definitely finished. As many applications do not have proper external workflow control, this can be a way to make sure processing does not interfere with file ingest. This parameter prevents clients from seeing special files such as sockets, devices and fifo's in directory listings. This parameter prevents clients from seeing the existence of files that cannot be read.
Defaults to off. Please note that enabling this can slow down listing large directories significantly. Samba has to evaluate the ACLs of all directory members, which can be a lot of effort.
This parameter prevents clients from seeing the existence of files that cannot be written to. Note that unwriteable directories are shown as usual. This option can be used to make use of the change notify privilege. By default notify results are not checked against the file system permissions. If "honor change notify privilege" is enabled, a user will only receive notify results, if he has change notify privilege or sufficient file system permissions.
If a user has the change notify privilege, he will receive all requested notify results, even if the user does not have the permissions on the file system. If set to yes , Samba will act as a Dfs server, and allow Dfs-aware clients to browse Dfs trees hosted on the server.
See also the msdfs root share level parameter. Specifies whether samba should use expensive hostname lookups or use the ip addresses instead. An example place where hostname lookups are currently used is when checking the hosts deny and hosts allow. A synonym for this parameter is allow hosts. This parameter is a comma, space, or tab delimited set of hosts which are permitted to access a service.
If specified in the [global] section then it will apply to all services, regardless of whether the individual service has a different setting. You can specify the hosts by name or IP number. Note that this man page may not be present on your system, so a brief description will be given here also. Note that the localhost address The following examples may provide some help:.
See testparm 1 for a way of testing your host access to see if it does what you expect. The opposite of hosts allow - hosts listed here are NOT permitted access to services unless the specific services have their own lists to override this one. Where the lists conflict, the allow list takes precedence. In the event that it is necessary to deny all by default, use the keyword ALL or the netmask 0. By default, Samba will cache these results for one week.
This is performed by Winbindd with a configurable plugin interface. Samba's ID mapping is configured by options starting with the idmap config prefix. The idmap configuration is hence divided into groups, one group for each domain to be configured, and one group with the asterisk instead of a proper domain name, which specifies the default configuration that is used to catch all domains that do not have an explicit idmap configuration of their own. The corresponding manual pages contain the details, but here is a summary.
The first three of these create mappings of their own using internal unixid counters and store the mappings in a database. These are suitable for use in the default idmap configuration.
The rid and hash backends use a pure algorithmic calculation to determine the unixid for a SID. The autorid module is a mixture of the tdb and rid backend. It creates ranges for each domain encountered and then uses the rid algorithm for each of these automatically configured domains individually.
The ad backend uses unix ids stored in Active Directory via the standard schema extensions. The nss backend reverses the standard winbindd setup and gets the unix ids via names from nsswitch which can be useful in an ldap setup. Defines the available matching uid and gid range for which the backend is authoritative.
For allocating backends, this also defines the start and the end of the range for allocating new unique IDs. The configured ranges must be mutually disjoint. This option can be used to turn the writing backends tdb, tdb2, and ldap into read only mode.
This can be useful e. This configuration assumes that the admin of CORP assigns unix ids below via the SFU extensions, and winbind is supposed to use the next million entries for its own mappings from trusted domains and for local groups for example. The idmap gid parameter specifies the range of group ids for the default idmap configuration. See the idmap config option. The idmap uid parameter specifies the range of user ids for the default idmap configuration.
See also create krb5 conf. This allows you to include one config file inside another. The file is included literally, as though typed in place. See the section on registry-based configuration for details. Note that this option automatically activates registry shares.
This parameter can be used to ensure that if default acls exist on parent directories, they are always honored when creating a new file or subdirectory in these parent directories.
The default behavior is to use the unix mode specified when creating the directory. Enabling this option sets the unix mode to , thus guaranteeing that default directory acls are propagated. The ownership of new files and directories is normally governed by effective uid of the connected user. This option allows the Samba administrator to specify that the ownership for new files and directories should be controlled by the ownership of the parent directory.
Common scenarios where this behavior is useful is in implementing drop-boxes, where users can create and edit files but not delete them and ensuring that newly created files in a user's roaming profile directory are actually owned by the user.
The unix only option effectively breaks the tie between the Windows owner of a file and the UNIX owner. As a logical consequence, in this mode, setting the the Windows owner of a file does not modify the UNIX owner. The UNIX owner of a directory is locally set and inherited by all subdirectories and files, and they all consume the same quota. The permissions on new files and directories are normally governed by create mask , directory mask , force create mode and force directory mode but the boolean inherit permissions parameter overrides this.
Their execute bits continue to be determined by map archive , map hidden and map system as usual. Note that the setuid bit is never set via inheritance the code explicitly prohibits this.
This can be particularly useful on large systems with many users, perhaps several thousand, to allow a single [homes] share to be used flexibly by each user.
This parameter takes a list of host names, addresses or networks for which the initial samlogon reply should be delayed so other DCs get preferred by XP workstations if there are any. The length of the delay can be specified with the init logon delay parameter. This parameter specifies a delay in milliseconds for the hosts configured for delayed initial samlogon with init logon delayed hosts. By default Samba will query the kernel for the list of all active interfaces and use any interfaces except The option takes a list of interface strings.
Each string can be in any of the following forms:. In this case the netmask is determined from the list of interfaces obtained from the kernel. The "mask" parameters can either be a bit length such as 24 for a C class network or a full netmask in dotted decimal form. The "IP" parameters above can either be a full dotted decimal IP address or a hostname which will be looked up via the OS's normal hostname resolution mechanisms. By default Samba enables all active interfaces that are broadcast capable except the loopback adaptor IP address In order to support SMB3 multi-channel configurations, smbd understands some extra parameters which can be appended after the actual interface with this extended syntax note that the quoting is important in order to handle the ; and , characters :.
Speed is specified in bits per second. Note that these options are mainly intended for testing and development rather than for production use. At least on Linux systems, these values should be auto-detected, but the settings can serve as last a resort when autodetection is not working or is not available. The specified values overwrite the auto-detected values. The first two example below configures three network interfaces corresponding to the eth0 device and IP addresses The netmasks of the latter two interfaces would be set to The other examples show how per interface extra parameters can be specified.
Notice the possible usage of "," and ";", which makes the double quoting necessary. This is a list of users that should not be allowed to login to this service. This is really a paranoid check to absolutely ensure an improper setting does not breach your security. This is useful in the [homes] section. This parameter is only applicable if printing is set to iprint. The value of the parameter an integer represents the number of seconds between keepalive packets. If this parameter is zero, no keepalive packets will be sent.
Keepalive packets, if sent, allow the server to tell whether a client is still present and responding. Basically you should only use this option if you strike difficulties. This parameter determines the encryption types to use when operating as a Kerberos client. Possible values are all , strong , and legacy. This library is normally configured outside of Samba, using the krb5.
This file may also include directives to configure the encryption types to be used. However, Samba implements Active Directory protocols and algorithms to locate a domain controller. In order to force the Kerberos library into using the correct domain controller, some Samba processes, such as winbindd 8 and net 8 , build a private krb5. This private file controls all aspects of the Kerberos library operation, and this parameter controls how the encryption types are configured within this generated file, and therefore also controls the encryption types negotiable by Samba.
When set to all , all active directory encryption types are allowed. When set to strong , only AES-based encryption types are offered.
Active Oldest Votes. Improve this answer. Sign up or log in Sign up using Google. Sign up using Facebook. Sign up using Email and Password. Post as a guest Name. Email Required, but never shown. The Overflow Blog. Podcast Making Agile work for data science.
Stack Gives Back Featured on Meta.
0コメント